Hevle Aviation Harmon Rocket

Steps on how to install Intersection Fairings on your Wheel Pants


First fill open holes with paper and use tape to make a general shape

   

Second, Use some hobby clay and form it in a shape you like. This can take a while and make your hand tired, but can be done.

Now coat the area with some mold release (follow instructions) You can also use wax. Mix up your Epoxy and use a good medium weight fiberglass cloth and put on 4 layers

Once it has dried put on some safety glasses and use compressed air and an air nozzle and break it away from the pants and gear legs, cut the trailing edge. Mark your shape and cut out. Sand and use some body filler to make smooth.